Klüber Unisilkon L 250 L Grease for valves and fittings 500g cartridge

Klüber Unisilkon L 250 L Grease for valves and fittings 500g cartridge

pics/Kluber/Copyright EIS/cartridge/klueber-unisilkon-l-250-l-grease-for-valves-and-fittings-500-g-euro-cartridge-details.jpg
  • pics/Kluber/Copyright EIS/cartridge/klueber-unisilkon-l-250-l-grease-for-valves-and-fittings-500-g-euro-cartridge-details.jpg
  • pics/Kluber/Copyright EIS/cartridge/klueber-unisilkon-l-250-l-grease-for-valves-and-fittings-500-g-euro-cartridge2.jpg
  • pics/Kluber/klueber_logo.jpg

285.54 285.54 incl. VAT (239.95 excl. VAT), per piece *

Availability: In Stock - shipping immediately

Packaging unit: 1 piece

Manufacturer: KLUBER

Country of origin: DE/0004

Customs tariff number: 34039900

Weight per piece: 550 g

Please give the recipient email address, as well as your name and email address.

Recipient
Sender

The fields marked with (×) are required.
Security (ANTI-SPAM)
( Examples: two + three = 5, three - five = -2 )
The product description does not help you?
No problem. Simply fill out the form and we will answer you as soon as possible.

Questions about the product

The fields marked with (×) are required.
Security (ANTI-SPAM)
( Examples: two + three = 5, three - five = -2 )
Klüber UNISILKON L 250 L Special lubricating grease for drinking water, beverage and heating valves and fittings
  • UNISILKON L 250 L is a special lubricant based on silicone oil and PTFE with high thermal stability. UNISILKON L 250 L offers good penetration ability in small lubrication gaps and lube points of difficult access. Owing to its relatively high viscosity, adhesion is improved even in case of unfavourable geometries.
  • UNISILKON L 250 L is resistant to cold and hot water, superheated steam up to approx. 130 °C as well as industrial cleaning agents and disinfectants. UNISILKON L 250 L is also resistant to pumpable foodstuffs and beverages like fruit juices, beer or milk products. UNISILKON L 250 L is not resistant to
  • organic solvents or strong acid and alkaline solutions.
  • UNISILKON L 250 L is NSF H1 registered and therefore complies with FDA 21 CFR § 178.3570. The lubricant was developed for incidental contact with products and packaging materials in the food-processing, cosmetics, pharmaceutical or animal feed industries. The use of UNISILKON L 250 L can contribute to increase reliability of your production processes.
  • We nevertheless recommend conducting an additional risk analysis, e.g. HACCP.
  • Temperature range: -45°C to +160°C 
  • Volume: 500g
  • Also available in: Cartridge 500g, Can750 g, Bucket 30kg
Benefits for your application
  • Proven effective in valves and fittings as well as adjusting mechanisms in the drinking water, beverage, sanitary and heating sectors
  • Certified acc. to international standards for valves and fittings, e.g. DVGW-KTW, WRAS, ACS, AS 4020, NSF Standard 61 and NSF H1
  • Long-term protection of seals and bearings owing to the lubricant’s good resistance to numerous media like disinfectants, cleaning agents, water, steam
Applications
  • UNISILKON L250L is used as lubricating and sealing grease for:
    • domestic valves & fittings for drinking water, (e.g. ceramic discs and piston cartouches, thermo regulators). As the lubricant’s viscosity is rather independent of service temperatures, UNISILKON L250 L allows constant actuating forces within the whole cold/hot water range of e.g. single-lever mixer taps.
    • valves and fittings of heating installations (e.g. thermoregulators, tap cocks, pressfit seals)
  • UNISILKON L250 L has also proven effective as assembly aid for radial shaft seals and packings in contact with cold or hot water and steam.
Application notes
UNISILKON L 250 L is neutral towards most metals, thermoplastics and elastomers. Owing to the many different elastomer and plastic compositions their  compatibility should be checked prior to series applications. UNISILKON L 250 L can be applied by means of spatula, brush, usual metering devices or the tampon printing method. Please observe the material safety data sheet.
Technical specifications
 Article number 0221020594
 NLGI grade, DIN 51818 3
 NSF-H1 registration 141 714
 Chemical composition, type of oil methyl silicone oil
 Chemical composition, solid lubricant PTFE
 Lower service temperature -45 °C / -49 °F
 Upper service temperature 160 °C / 320 °F
 Color space white
 Texture fibrous
 Texture homogeneous
 Density at 20 °C approx. 1.25 g/cm³
 Worked penetration, DIN ISO 2137, 25 °C, lower limit value 220 x 0.1 mm
 Worked penetration, DIN ISO 2137, 25 °C, upper limit value 250 x 0.1 mm
 Shear viscosity at 25 °C, shear rate 300 s-1, equipment:rotational viscometer approx. 13 000 mPas
 Kinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 25 °C approx. 1 350 mm²/s
 Copper corrosion, DIN 51811, (lubricating grease), 24h/100°C 1 - 100 corrosion degree
 Water resistance, DIN 51807 pt. 01, 3 h/90 °C, rating <= 1 - 90
 Minimum shelf life from the date of manufacture - in a dry, frost-free place and in the unopened
 original container, approx.
 36 months


Klüber UNISILKON L250L, Klueber, Kluber UNISILKON L250 L, L 250L

Property GTIN/EAN MPN (Manufacturer Part Number)
- - 943150173

 

Related products

* Price in Euro including VAT, plus forwarding charges.
In parentheses: price in Euro excluding VAT, plus forwarding charges.
Clients outside the EU as well as companies outside of Germany don't pay any VAT (excepting for shipping in Germany)!

 

 Shopping Cart    
Your shopping cart is empty
 Log in    

Password forgotten

Register

Distributor Login

Password forgotten

Register

 Transport    
forwarders
With package tracking
Shipping in 164 countries!
 Payment    
     
Prepayment using bank transfer => discount on all items of 2% Payment on invoice using bank transfer
 Follow us