Klübersynth HBE 94-401 Synthetic heavy-duty long-term lubricant 400g

Klübersynth HBE 94-401 Synthetic heavy-duty long-term lubricant 400g

pics/Kluber/Copyright EIS/cartridge/kluebersynth-hbe-94-401-synthetic-heavy-duty-long-term-lubricant-400g-cartridge.jpg
  • pics/Kluber/Copyright EIS/cartridge/kluebersynth-hbe-94-401-synthetic-heavy-duty-long-term-lubricant-400g-cartridge.jpg
  • pics/Kluber/klueber_logo.jpg

46.79 46.79 incl. VAT (39.32 excl. VAT), per piece *

Availability: In Stock - shipping immediately

Packaging unit: 1 piece

Manufacturer: KLUBER

Country of origin: DE/0004

Customs tariff number: 34031980

Weight per piece: 400 g

Please give the recipient email address, as well as your name and email address.

Recipient
Sender

The fields marked with (×) are required.
Security (ANTI-SPAM)
( Examples: two + three = 5, three - five = -2 )
The product description does not help you?
No problem. Simply fill out the form and we will answer you as soon as possible.

Questions about the product

The fields marked with (×) are required.
Security (ANTI-SPAM)
( Examples: two + three = 5, three - five = -2 )

Synthetic heavy-duty grease for long-term lubrication

  • As a manufacturer or operator of modern installations operating at high temperature, you need to protect components subject to high loads and with a high percentage of sliding friction reliably against wear and corrosion, even when they are not relubricated continuously (e.g. sealed rolling bearings). With Klübersynth HBE 94-401 we offer you a lubricating grease
    based on high-quality synthetic base oil and a special calcium complex soap thickener. This combination enables the formation of a lubricating film with high resistance to mechanical
    loads providing excellent wear protection. Moreover, Klübersynth HBE 94-401 is resistant to water and has a good sealing effect due to the special thickener component used. Are
    your components subject to strong oscillations? With its very good antiwear properties, Klübersynth HBE 94-401 meets this challenge too.
  • Size: 400g cartridge
  • Available in 400g cartridge, 1kg can, 25kg bucket

Benefits

  • Very good wear protection,
  • Excellent corrosion protection
  • Excellent water resistance
  • Reduced maintenance costs due to extended relubrication intervals or lifetime lubrication, even at elevated temperatures due to synthetic grease technology

Application

  • loaded rolling and plain bearings at high temperatures, e.g. in the steel industry.
    This special lubricating grease meets the complex requirements of your for-life lubricated components, e.g. in
    – support rollers in continuous casting installations
    – conveyor roller bearings in continuous furnaces
    – support roller bearings in pickling and tin plating
    – plain bearings of forging presses
  • Due to its excellent wear resistance this lubricating grease can also be used for roller bearings in wood pellet presses.

Product data

Article number4295
Chemical composition, type of oilsynthetic hydrocarbon oil
Chemical composition, thickenercalcium complex soap
Lower service temperature-35 °C / -31 °F
Upper service temperature160 °C / 320 °F
Colour spacebrown
Texturelong-fibred
Texturehomogeneous
Density at 20 °Capprox.  0,93 g/cm³
Flow pressure of lubricating greases, DIN 51805-2, test temperature: -35 °C<= 1 400 mbar
Worked penetration, DIN ISO 2137, 25 °C, lower limit value290 x 0,1 mm
Worked penetration, DIN ISO 2137, 25 °C, upper limit value320 x 0,1 mm
Speed factor (n x dm)approx. 300 000 mm/min
Shear viscosity at 25 °C, shear rate 300 s-1, equipment: rotational viscometer, lower limit value4 000 mPas
Shear viscosity at 25°C, shear rate 300 s-1, equipment:rotational viscometer, upper limit value8 000 mPas
Kinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 40 °Capprox. 400 mm²/s
Kinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 100 °Capprox. 40 mm²/s
Corrosion inhibiting properties of lubricating greases, DIN 51802, (SKF-EMCOR), test duration: 1 week, distilled water<= 1 corrosion degree
Oil separation, DIN 51817 N, after 7 d/40 °C<= 3 % by weight
Drop point, DIN ISO 2176, IP 396>= 230 °C
Four-ball tester, welding load, DIN 51350 pt. 04>= 2 800 N
Water resistance, DIN 51807 pt. 01, 3 h/90 °C, rating0 - 90
Minimum shelf life from the date of manufacture - in a dry, frost-free place and in the unopened original container, approx.24 months

 
Property GTIN/EAN MPN (Manufacturer Part Number)
- 0042950591 943150651

 

Related products

* Price in Euro including VAT, plus forwarding charges.
In parentheses: price in Euro excluding VAT, plus forwarding charges.
Clients outside the EU as well as companies outside of Germany don't pay any VAT (excepting for shipping in Germany)!

 

 Shopping Cart    
Your shopping cart is empty
 Log in    

Password forgotten

Register

Distributor Login

Password forgotten

Register

 Transport    
forwarders
With package tracking
Shipping in 164 countries!
 Payment    
     
Prepayment using bank transfer => discount on all items of 2% Payment on invoice using bank transfer
 Follow us