Castrol Optileb GR 9830 High-temperature bearing grease NLGI-2 1kg

Castrol Optileb GR 9830 High-temperature bearing grease NLGI-2 1kg

pics/Castrol/eis-copyright/Tin/Optileb GR 9830/castrol-optileb-gr-9830-high-temperature-grease-nlgi-2-1kg-tin-001.jpg
  • pics/Castrol/eis-copyright/Tin/Optileb GR 9830/castrol-optileb-gr-9830-high-temperature-grease-nlgi-2-1kg-tin-001.jpg
  • pics/Castrol/Banners/Optileb/castrol-optileb-gr-9830-main-banner-02.jpg
  • pics/Castrol/logo-castrol-car-motor-oil.png

392.64 392.64 incl. VAT (329.95 excl. VAT), per piece *

Availability: Available

Packaging unit: 1 piece

Manufacturer: Castrol

Country of origin: DE/0004

Customs tariff number: 34039900

Weight per piece: 1.1 kg

Please give the recipient email address, as well as your name and email address.

Recipient
Sender

The fields marked with (×) are required.
Security (ANTI-SPAM)
( Examples: two + three = 5, three - five = -2 )
The product description does not help you?
No problem. Simply fill out the form and we will answer you as soon as possible.

Questions about the product

The fields marked with (×) are required.
Security (ANTI-SPAM)
( Examples: two + three = 5, three - five = -2 )

Castrol Optileb™ GR 9830 (previously called Molub-Alloy™ Foodproof 9830) is a special high-temperature grease (NLGI grade 2) formulated from a synthetic oil and solid lubricants (PTFE), developed for the lubrication of rolling and sliding bearings. The grease is excellently suited for high-temperature applications in the food and beverage industries where minimum lubricant consumption, drip-free lubrication and physiological safety are required. It can also be used as a safety sliding agent for oxygen installations.

Application
  • Especially suited for applications in baking and drying ovens in the food and canning industries.
  • Due to its low volatility, is also suited for vacuum applications, e.g. coating installations.
  • May be used in continuous service up to 250°C and be exposed to temperatures up to 280°C for short-time applications.
Advantages
  • Aging resistance at high temperatures
  • Thermal and chemical stability
  • Resistant to most solvents, even chlorinated hydrocarbons, strong acids, alkalis and oxidizing agents, e.g.: acetone, benzene, benzol, boron trifluoride, bromine, chlorine, chlorobenzene, cyclohexane, dioxan, natural gas, ethylene acetate, fluorine, halogens, potassium hydroxide, methylene chloride, methyl formiate, sodium hydroxide, perchloro-ethylene, petroleum ether, hydrochloric and sulphuric acid, tetrahydrofurane, toluol, 1.1.1. trichlorethane, trichlorethylene, xylol
  • Excellent lubricating properties – as measured by standard laboratory tests and extensive field evaluations
  • Extended relubrication intervals without undue risk of lubricant starvation or increased lubricant consumption
  • Below 280°C the lubricant resists the thickening and hardening which is typical of mineral oil products in hightemperature applications
  • Minimum consumption, economic application and clean operating conditions
  • Compatible with the following sealing materials: NBR, EPDM, NR, MWQ, PVMQ, PA, PE, PUR, PTFE
  • Physiologically safe; approval by LGA (Bavaria)
Technical specifications
  • Colour: White
  • Density @ 15°C / 59°F  kg/m³: 1930
  • Worked Penetration (60 strokes @ 25°C / 77°F)  0.1 mm: 265-295
  • Thickener type: PTFE
  • Base Oil Viscosity @ 40°C / 104°F  mm²/s: 510
  • Base Oil Viscosity @ 100°C / 212°F  mm²/s: 46
  • Base Oil Viscosity @ 200°C / 392°F  mm²/s: 6.5
  • Viscosity Index: 135
  • Flash Point - open cup method  °C/°F: non-flammable
  • Pour Point °C/°F: -20/-4
  • Volume: 1kg tin
  • GLIS number: 15D691
  • MSDS code: 468605
Additional Information
  • Clean-up may be difficult because of the excellent resistance to ordinary cleaners and solvents. Use special solvents.
  • Where lubricants may come in contact with products (e.g. food, textiles etc.) good effective sealing and handling procedures should be maintained.
  • At continuous operating temperatures above 250°C, very small amounts of toxic vapors may develop due to chemical changes; forced draft ventilation is then necessary
Castrol Optileb GR-9830, Optileb GR9830
Property GTIN/EAN MPN (Manufacturer Part Number)
- - 15D691

 

Related products

* Price in Euro including VAT, plus forwarding charges.
In parentheses: price in Euro excluding VAT, plus forwarding charges.
Clients outside the EU as well as companies outside of Germany don't pay any VAT (excepting for shipping in Germany)!

 

 Shopping Cart    
Your shopping cart is empty
 Log in    

Password forgotten

Register

Distributor Login

Password forgotten

Register

 Transport    
forwarders
With package tracking
Shipping in 164 countries!
 Payment    
     
Prepayment using bank transfer => discount on all items of 2% Payment on invoice using bank transfer
 Follow us