Klübersynth GEM 4-220N Synthetic high-performance oil 200L barrel

Klübersynth GEM 4-220N Synthetic high-performance oil 200L barrel

pics/Kluber/Copyright EIS/barrel/kluebersynth-gem-4-220n-synthetic-high-performance-oil-200l-barrel.jpg
  • pics/Kluber/Copyright EIS/barrel/kluebersynth-gem-4-220n-synthetic-high-performance-oil-200l-barrel.jpg
  • pics/Kluber/klueber_logo.jpg

5948.81 5,948.81 incl. VAT (4,999.00 excl. VAT), per piece *

Availability: on request

Packaging unit: 1 piece

Manufacturer: KLUBER

Country of origin: DE/0004

Customs tariff number: 34031980

Weight per piece: 200.0 kg

Please give the recipient email address, as well as your name and email address.

Recipient
Sender

The fields marked with (×) are required.
Security (ANTI-SPAM)
( Examples: two + three = 5, three - five = -2 )
The product description does not help you?
No problem. Simply fill out the form and we will answer you as soon as possible.

Questions about the product

The fields marked with (×) are required.
Security (ANTI-SPAM)
( Examples: two + three = 5, three - five = -2 )

Klübersynth GEM 4 N

  • Klübersynth GEM 4 N is a synthetic high-performance gear and multipurpose oil based on polyalphaolefin satisfying the growing requirements and increasing power density of modern gears. Klübersynth GEM 4 N includes KlüberComp Lube Technology*, i.e. it is based on especially high-grade raw materials and
    advanced additives, enabling maximum performance in the lubrication of all gear components.
  • Klübersynth GEM 4 N clearly exceeds CLP requirements according to DIN 51517-3. Corresponding gears can be
    switched to Klübersynth GEM 4 N without prior consultation with the gear manufacturer provided the general application notes are observed.
  • Klüberoil GEM 4 N offers high scuffing load capacity. Gears are sufficiently protected against scuffing even at extremely high peak loads, vibrations or oscillations. The excellent wear protection of both gears and rolling bearings ensures that the service life calculated for the lubricated components is achieved, leading to lower maintenance and repair costs. The oil's high micropitting resistance of GFT ≥ 10 according to FVA
    54/7 offers sufficient protection to gears that are subject to high loads and would normally be susceptible to this type of damage.
  • Klübersynth GEM 4 N offers a much longer service life than mineral oils due to the excellent ageing and oxidation
    resistance of the selected raw materials; thus service intervals can be extended and maintenance costs reduced. The product's low foaming tendency and anti-corrosive properties enable problem-free gear operation. Freudenberg seals made of 72 NBR 902, 75 FKM 585, 75 FKM 260466 and 75 FKM 170055 are resistant to Klübersynth GEM 4 N. Leakage and oil contamination are prevented.
  • The excellent viscosity-temperature behaviour supports the formation of a sufficient lubricant film across a wide service temperature range, even at elevated and high temperatures. Therefore, a single viscosity grade can cover both low and high temperatures in many applications.
  • The optimised friction behaviour enabled by the carefully selected base oils reduces power loss and improves gear efficiency.
  • Klübersynth GEM 4 N is approved by SEW Eurodrive, Getriebebau Nord, Lenze, Moventas, Bonfiglioli, Rexnord,
    Hansen, Brevini, Stöber Antriebstechnik, ZAE Antriebssysteme, David Brown, FLSmidth MAAG Gears, etc.
  • Klübersynth GEM 4-320 N is approved for use in wind power plants by Winergy, Moventas, ZF WP, Bosch Rexroth, ACCIONA ENERGY, and many more.
  • By using Klübersynth GEM 4 N you can benefit from a number of advantages that will help you save costs easily and efficiently. We look forward to hearing from you.
  • Content: 200kg drum
  • Available in 20kg bucket, 200kg drum

Benefits for your application

  • High scuffing protection
  • Excellent wear protection for gears and rolling bearings
  • Good shear stability for reliable lubricant film formation
  • High micropitting resistance
  • Excellent ageing and oxidation resistance
  • Wide service temperature range due to good viscosity-temperature behaviour
  • Low foaming tendency
  • Energy savings due to optimised friction behaviour
  • Good elastomer compatibility
  • Approvals by numerous gear OEMs

Application

  • Klübersynth GEM 4 N was specially developed for the lubrication of spur, bevel, hypoid and planetary gears that are subject to high loads. Such gears are frequently used in the wind, steel, mining and sugar industries. It is also used for the lubrication of standard worm gears as defined in DIN 3996.
  • Klübersynth GEM 4 N can also be used for the lubrication of plain and rolling bearings, all kinds of toothed couplings, chains, guideways, joints, spindles and pumps, especially in applications where the equipment is exposed to elevated temperatures or pronounced temperature fluctuations.

Technical specifications

Article number12234
Marking acc. to DIN 51502CLP HC 220
Classification acc. to ISO 12925-1CKC 220
Lower service temperature-40 °C / -40 °F
Upper service temperature140 °C / 284 °F
Density, based on DIN 51757) at 15 °Capprox. 860 kg/m³
Foam test, ASTM-D 892, ISO 6247, sequence I/24 °C<= 100/10 ml
Foam test, ASTM-D 892, ISO 6247, sequence II/ 93.5 °C<= 100/10 ml
Foam test, ASTM D 892, ISO 6247, sequence III/24°C<= 100/10 ml
Flash point, DIN EN ISO 2592, Cleveland, open-cup apparatus>= 200 °C
Kinematic viscosity, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 40 °Capprox. 220 mm²/s
Kinematic viscosity, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 100 °Capprox. 27 mm²/s
ISO viscosity grade, DIN ISO 3448220
Viscosity index, DIN ISO 2909>= 150
Copper corrosion, DIN EN ISO 2160, 3 h/100 °C1 - 100 corrosion degree
Anticorrosive properties on steel, DIN ISO 7120, method A, steel, 24 h/60 °Cno rust corrosion degree
Pour point, DIN ISO 3016<= -40 °C
Ageing properties, ASTM D 2893, increase in viscosity<= 6 %
FZG scuffing test, DIN ISO 14635-1, A/8.3/90, scuffing load stage>= 14
FZG scuffing test, based on DIN ISO 14635-1, A/16.6/90, scuffing load stage>= 12
FAG FE8 rolling bearing test, DIN 51819-3, D 7,5/80-80, wear of rolling element<= 30 mg
FAG FE8 rolling bearing test, DIN 51819-3, D 7,5/80-80, wear of cage<= 200 mg
Minimum shelf life from the date of manufacture - in a dry, frost-free place and in the unopened original container, approx.24 months


Property GTIN/EAN MPN (Manufacturer Part Number)
- - 122340335

 

Related products

* Price in Euro including VAT, plus forwarding charges.
In parentheses: price in Euro excluding VAT, plus forwarding charges.
Clients outside the EU as well as companies outside of Germany don't pay any VAT (excepting for shipping in Germany)!

 

 Shopping Cart    
Your shopping cart is empty
 Log in    

Password forgotten

Register

Distributor Login

Password forgotten

Register

 Transport    
forwarders
With package tracking
Shipping in 164 countries!
 Payment    
     
Prepayment using bank transfer => discount on all items of 2% Payment on invoice using bank transfer
 Follow us