Loctite EA E-120HP 2-part epoxy adhesive 50ml

Loctite EA E-120HP 2-part epoxy adhesive 50ml

pics/Loctite/EA E-120HP/loctite-ea-e-120-hp-2-part-epoxy-adhesive-50ml-02.jpg
  • pics/Loctite/EA E-120HP/loctite-ea-e-120-hp-2-part-epoxy-adhesive-50ml-02.jpg
  • pics/Loctite/EA E-120HP/loctite-ea-e-120-hp-2-part-epoxy-adhesive-50ml-01.jpg
  • pics/Loctite/Banners/Structural adhesives/EA 9489/main-banner-structural-adhesive-ea-9489-01.jpg
  • pics/Loctite/logo_loctite.jpg

40.4 40.40 incl. VAT (33.95 excl. VAT), per piece *

Availability: Available

Packaging unit: 1 piece

Manufacturer: Henkel

Country of origin: IT/0005

Customs tariff number: 35061000

Weight per piece: 100 g

Please give the recipient email address, as well as your name and email address.

Recipient
Sender

The fields marked with (×) are required.
Security (ANTI-SPAM)
( Examples: two + three = 5, three - five = -2 )
The product description does not help you?
No problem. Simply fill out the form and we will answer you as soon as possible.

Questions about the product

The fields marked with (×) are required.
Security (ANTI-SPAM)
( Examples: two + three = 5, three - five = -2 )

Loctite EA E-120HP is a 2-part, high viscosity, industrial-grade epoxy adhesive with extended worklife. Once mixed, it cures at room temperature to form a tough bondline with excellent resistance to peel and impact forces. It also provides superior thermal shock resistance, excellent mechanical and electrical properties, and resistance to a wide range of solvents and chemicals.

  • Pack size: 50 ml dual cartridge
Applications
  • Multi-substrate structural bonding
  • Bonding of nose cones in aerospace applications
  • General industrial bonding requiring high impact and high peel strength
  • Suitable for aluminum, steel, other metals, plastics and ceramics
Characteristics
  • Extended worklife: 120 minutes
  • High viscosity, shock-resistant adhesive
  • Resistant to peel and impact forces
  • Excellent resistance to solvents and chemicals
Technical specifications
Number of components2-part epoxy adhesive
Cure typeRoom temperature (ambient) cure
Mix ratio (by volume)2 : 1
Mix ratio (by weight)100 : 46
Worklife120 minutes
ViscosityHigh viscosity
Color, mixedBeige
Color, resinBeige
Color, hardenerAmber
Recommended substratesCeramic, aluminum, steel, plastics

Hazard statements (CLP) – Part A

Signal word: Warning

Hazard pictogram(s):

GHS07

Product identifier (contains)
  • RP Bisphenol F–epichlorohydrin resin, MW ≤ 700
  • 2,2'-[(1-methylethylidene)bis(4,1-phenyleneoxymethylene)]bisoxirane
  • Acrylic polymers
  • Dodecane-1-thiol
Hazard statements (H-statements)
  • H315 – Causes skin irritation.
  • H317 – May cause an allergic skin reaction.
  • H319 – Causes serious eye irritation.
  • H411 – Toxic to aquatic life with long lasting effects.
Precautionary statements (P-statements)
Prevention:
  • P273 – Avoid release to the environment.
  • P280 – Wear protective gloves.
Response:
  • P333 + P313 – If skin irritation or rash occurs: Get medical advice/attention.
  • P302 + P352 – IF ON SKIN: Wash with plenty of soap and water.
  • P337 + P313 – If eye irritation persists: Get medical advice/attention.

SDS reference: 439065 V004.0


Hazard statements (CLP) – Part B

Signal word: Danger

Hazard pictogram(s):

GHS07

Hazard statements
  • Causes severe skin burns and eye damage.
  • May cause an allergic skin reaction.
Hazard classes / categories
  • Skin corrosion: 1C – Corrosive
  • Serious eye damage: 1
  • Skin sensitization: 1
Precautionary statements
Prevention:
  • Avoid breathing vapors, mist, or spray.
  • Wash affected area thoroughly after handling.
  • Contaminated work clothing should not be allowed out of the workplace.
  • Wear protective gloves, clothing, eye and face protection.
Response:
  • IF SWALLOWED: Rinse mouth. Do NOT induce vomiting.
  • IF ON SKIN (or hair): Take off immediately all contaminated clothing.
  • IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.
  • Immediately call a POISON CENTER or physician.
  • IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
  • If skin irritation or rash occurs: Get medical attention.
  • Wash contaminated clothing before reuse.
Storage:
  • Store locked up.
Disposal:
  • Dispose of contents and/or container according to federal, state/provincial and local regulations.


Hazardous materials. The forwarding charges may be raised, if shipping to: DE, AT, NL, GB, CH, CZ, IT, ES, FI, NO, BE, IE, RO, PL, FR, PT, LU, DK, LI, GR, SE, SK, BG, SI, CA, LT, EE, LV, HR, SA,

 

Information on product safety (Manufacturer, Contact)

Henkel AG & Co. KGaA, Henkelstr. 67, 40589 Düsseldorf, GERMANY, +49 211 7970, [email protected], www.henkel.com

Property GTIN/EAN MPN (Manufacturer Part Number)
- - EA E-120HP-50ml

 

Related products

* Price in Euro including VAT, plus forwarding charges.
In parentheses: price in Euro excluding VAT, plus forwarding charges.
Clients outside the EU as well as companies outside of Germany don't pay any VAT (excepting for shipping in Germany)!

 

 Shopping Cart    
Your shopping cart is empty
 Log in    

Password forgotten

Register

Distributor Login

Password forgotten

Register

 Transport    
forwarders
With package tracking
Shipping in 169 countries!
 Payment    
     
Prepayment using bank transfer => discount on all items of 2% Payment on invoice using bank transfer
 Follow us