Loctite CAT 23LV Epoxy catalyst hardener 450g

LOCTITE CAT 23LV is a low-viscosity epoxy catalyst for use with potting and encapsulating resin systems.

• Pack size: 450 g
• AQlso available: 3 kg

Applications

• Epoxy catalyst
• Designed for use with potting and encapsulating resins
• For use with proper resin combinations (cannot be used on its own)
• Can be used with a variety of resins

Characteristics

• Low viscosity
• Thermal shock resistant
• Low color
• Excellent adhesion to glass

Technical specifications

Curing performance

• 16 to 24 hours @ 25°C
• 4 hours @ 65°C

Product Description

LOCTITE CAT 23LV hardener is designed for use with potting and encapsulating resins. LOCTITE CAT 23LV can be used with a variety of resins. For more information on mixed properties when used with other available resins, please contact your local technical service representative for assistance and recommendations.

Processing Instructions

• For use with proper resin combination; cannot be used on its own
• Consult the Safety Data Sheet (SDS) for safe handling information

Storage

• Store product in the unopened container in a dry location
• Keep container tightly closed
• Ensure good ventilation
• Optimal storage: 25°C
• Storage below or above 25°C can adversely affect product properties
• Material removed from containers may be contaminated during use; do not return to the original container

Gefahrenhinweise (CLP)

Signal word: Danger

Hazard Statements (H-phrases)

• H314: Causes severe skin burns and eye damage.
• H317: May cause an allergic skin reaction.
• H412: Harmful to aquatic life with long lasting effects.

Precautionary Statements (P-phrases)

Prevention:

• P273: Avoid release to the environment.
• P280: Wear protective gloves/protective clothing/eye protection/face protection.

Response:

• P303+P361+P353: IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water [or shower].
• P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
• P310: Immediately call a POISON CENTER/doctor.
• P333+P313: If skin irritation or rash occurs: Get medical advice/attention.

Storage and disposal

• Do not allow product to enter drains/surface water/groundwater.
• Dispose of contents in accordance with local and national regulations.
• Packaging with product residues must be disposed of as hazardous waste.
• Waste code (EWC): 08 04 09* (adhesive and sealant waste containing other dangerous substances).

Other relevant information

• UFI: VATQ-JWFT-9206-94RA
• Contains: Polyoxypropylendiamine; 3,3'-Oxybis(ethylenoxy)bis(propylamine)
• Transport: UN 2735, Class 8, Packing Group II (Tunnel code: E)
• WGK (Germany): WGK 2
• Storage class (TRGS 510): 8B

Henkel AG & Co. KGaA, Henkelstr. 67, 40589 Düsseldorf, GERMANY, +49 211 7970, [email protected], www.henkel.com