Sikaflex 292i Multipurpose adhesive for marine applications white300ml

Sikaflex®-292i is a non-sag 1-component polyurethane adhesive of thixotropic, paste-like consistency which cures on exposure to atmospheric moisture. It exhibits excellent adhesive properties and a good mechanical strength. Sikaflex®-292i meets the low spread of flame requirements set out by the International Maritime Organisation (IMO).  

• Good gap-filling properties
• Can be painted
• Bonds well to a wide variety of substrates
• Wheelmark approved
• Solvent free and very low VOC
• Content: 300ml cartridge

Areas of Application

• Sikaflex®-292i is suitable for structural joints in marine constructions which will be subjected to high dynamic stresses
• It is suitable to bond metals, particularly aluminium (including anodized finishes), metal primers and paint coatings (2-component systems), or ceramic materials, plastics such as GRP (unsaturated polyester resin), ABS, etc.
• Seek manufacturer’s advice and perform tests on original substrates before using Sikaflex®-292i on materials prone to stress cracking.
• This product is suitable for experienced professional users only.
• Test with actual substrates and conditions have to be performed to ensure adhesion and material compatibility.  

Technical specifications

Hazard Statements (CLP)

Hazard Statements (H-Sentences)

• H317: May cause an allergic skin reaction.

Precautionary Statements (P-Sentences)

Prevention:

• P261: Avoid breathing mist or vapour.
• P280: Wear protective gloves.

Response:

• P302 + P352: IF ON SKIN: Wash with plenty of water.

Disposal:

• P501: Dispose of contents/container in accordance with local regulations.

Additional Information:

• P101: If medical advice is needed, have product container or label at hand.
• P102: Keep out of reach of children.

Sika Deutschland GmbH, Kornwestheimer Str. 103-107, 70439 Stuttgart, GERMANY, +49 711 8009-0, [email protected], www.sika.com